- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Performance that API 5L X52 PSL2 pipeline steel should have
- Surface Quality Requirements of EH40 Steel plate
- Excellent properties and applications of EH40 shipbuilding Steel
- Influence of gas in 50CrMo4 steel plate
- Cause of Quenching Cracks in 50CrMo4
- Factors Affecting Welding Toughness of
- Z direction performance of EH32 steel plate
- Features of AR450 wear-resistant plate
- Characteristics of NM500 wear-resistant plate
- Harm of inclusions in API 5L X42 pipeline steel
SEW 083 TStE 275 TM steel
TStE 275 TM steel plate/sheet, SEW 083 TStE 275 TM steel plate/sheet, TStE 275 TM steel plate/sheet supplier/Chinese supplier, TStE 275 TM steel plate/sheet mechanical property, TStE 275 TM steel plate/sheet price.
SEW 083 TStE 275 TM steel equivalent grade:
TStE 275 TM steel plate/sheet is in SEW 083 standard, the grade number is 1.8819. The equivalent material of TStE 275 TM steel are EN10113-3 S275ML, UNI 7382 Fe E 275 KTTM.
TStE275TM |
Comparision of steel grades |
|
EN10113-3 |
S275ML |
|
UNI 7382 |
Fe E 275 KTTM |
|
BS 4360 |
- |
|
ASTM |
- |
SEW 083 TStE 275 TM steel chemical composition %:
Main chemical composition in TStE 275 TM steel is carton max 0.13, silicon max 0.50, manganese max 1.5, phosphorus max 0.025, Sulphur max 0.02, chromium max 0.30. More detailed information about TStE 275 TM steel, please refer to the down table:
Grade |
C |
Si |
Mn |
P |
S |
N |
AL |
Nb |
V |
Ti |
Cr |
Ni |
Mo |
Cu |
CEV |
TStE275TM |
0.13 |
0.50 |
1.5 |
0.025 |
0.02 |
0.015 |
0.02 |
0.05 |
0.08 |
0.05 |
0.30 |
0.3 |
0.10 |
0.55 |
0.38 |
SEW 083 TStE 275 TM steel mechanical property:
TStE275TM is a technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.It is according to DIN-SEW083 standard.S means the structural steel, M means the delivery condition.Capital letter L for the quality with specified minimum values of values of impact DIN energy at temperature not lower than -50 degree.
Temperature |
-50 |
-40 |
-30 |
-20 |
-10 |
0 |
20 |
Notch impact test. Min. absorbed DINergy |
27 |
31 |
40 |
47 |
51 |
55 |
63 |
Nominal thickness(mm) |
to 16 |
16-40 |
40-63 |
63-80 |
80-100 |
100-120 |
ReH-Minimun yield strDINgth(Mpa) |
275 |
265 |
255 |
245 |
245 |
240 |
Nominal thickness(mm) |
to 40 |
40-63 |
63-80 |
80-100 |
100-120 |
Rm-TDINsile strDINgth(Mpa) |
370-530 |
360-520 |
350-510 |
350-510 |
350-510 |
Nominal thickness(mm) |
- |
||||
A-Minimum elongation |
24 |
Shanghai Katalor Industry Co., Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer’s expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As TStE 275 TM Mechanical and TStE 275 TM supplier,we can supply TStE 275 TM Chemical,TStE 275 TM Mechanical and TStE 275 TM standard for you ,please click to contact us