- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Performance that API 5L X52 PSL2 pipeline steel should have
- Surface Quality Requirements of EH40 Steel plate
- Excellent properties and applications of EH40 shipbuilding Steel
- Influence of gas in 50CrMo4 steel plate
- Cause of Quenching Cracks in 50CrMo4
- Factors Affecting Welding Toughness of
- Z direction performance of EH32 steel plate
- Features of AR450 wear-resistant plate
- Characteristics of NM500 wear-resistant plate
- Harm of inclusions in API 5L X42 pipeline steel
ASTM A204 Pressure Vessel Plate
There are there grades under ASTM A204 standard: Grade A, Grade B, Grade C. ASTM A204 specifies molybdenum alloy steel plates A204 A, A204 B, andA204 C, intended particularly for welded boilers and other pressure vessels.
A204 A, A204 B, andA204 C Steel Plates Specification
Thickness: 3-150mm
Width: 1220-4200mm
Length: 5000-18000mm
Notes: coil thickness ≤ 25mm
A204 A, A204 B, A204 C Pressure Vessel Plates Chemical Requirements
Elements |
Composition % |
||
Grade A |
Grade B |
Grade C |
|
Carbon, max.: |
|||
up to 1 in. [25 mm] incl. in thickness |
0.18 |
0.20 |
0.23 |
Over 1 in. to 2 in [50 mm] incl. in thickness |
0.21 |
0.23 |
0.26 |
Over 2 in. to 4 in. [100 mm] incl. in thickness |
0.23 |
0.25 |
0.28 |
Over 4 in. [100 mm] incl. in thickness |
0.25 |
0.27 |
0.28 |
Heat analysis: |
0.90 |
0.90 |
0.90 |
Product analysis: |
0.98 |
0.98 |
0.98 |
Phosphorus, max A |
0.035 |
0.035 |
0.035 |
Sulfur, max A |
0.040 |
0.040 |
0.040 |
Heat analysis |
0.15-0.40 |
0.15-0.40 |
0.15-0.40 |
Product analysis |
0.13-0.45 |
0.13-0.45 |
0.13-0.45 |
Heat analysis |
0.45-0.60 |
0.45-0.60 |
0.45-0.60 |
Product analysis |
0.41-0.64 |
0.41-0.64 |
0.41-0.64 |
|
Grade A |
Grade B |
Grade C |
|||
ksi |
[MPa] |
ksi |
[MPa] |
ksi |
[MPa] |
|
Tensile strength |
65-85 |
[450-585] |
70-90 |
[485-620] |
75-95 |
[515-655] |
Yield strength, min.A |
37 |
[255] |
40 |
[275] |
43 |
[295] |
Elongation in 8 in. [200 mm], min, % |
19B |
17B |
16B |
|||
Elongation in 2 in. [50 mm], min, % |
23B |
21B |
20B |