- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
- Performance that API 5L X52 PSL2 pipeline steel should have
- Surface Quality Requirements of EH40 Steel plate
- Excellent properties and applications of EH40 shipbuilding Steel
- Influence of gas in 50CrMo4 steel plate
- Cause of Quenching Cracks in 50CrMo4
- Factors Affecting Welding Toughness of
- Z direction performance of EH32 steel plate
- Features of AR450 wear-resistant plate
- Characteristics of NM500 wear-resistant plate
- Harm of inclusions in API 5L X42 pipeline steel
EN10025 S235JRG2 steel plate
S235JRG2,S235JRG2 steel plate,EN S235JRG2 steel, EN 10025 S235JRG2.
S235JRG2 steel is a specific one and has no different classes. It was regulated in EuroNorm EN 10025 superseded by EN 10025-2 (2006) and the new designation is just S235JR. Both editions deal with "structural" steels.
The designation given is the symbolic one, the numerical designation of material is 1.0038.
The symbolic designation means:
S- "Structural Grade"
235- minimum value of yield strength in MPa ( roughly 35 ksi) for thicknesses ut to 16 mm.
JR- Base steel (Charpy impact test not obligatory, optional only)
G2- Rimming steel not allowed.
More characteristics of this plain carbon steel available in long (Profiles, beams..) and flat products (sheet and plates) are:
Impact value (if specifically required)- 27 J at 20ºC
Carbon content:0.17% max. (0.20% for thicknesses over 40 mm)
Mn content: 1.40% max
P and S content: 0.045% max.
N content: 0.009% max (Not applicable if Al minimun is 0.020%)
ASTM steel S235JRG2 steel has different uses (can be applied to pressure service for example) even if it's a carbon steel too. The different grades refer to different strength grades.
If you want to use EN steels according to EN 10025, there are some other designations for different strength grades (for example S275 or S355 which have a higher yield strength.)
S235JRG2 steel plate Chemical analysis -% by mass*
Chemical elements | C≤ 16mm max |
C>16mm max |
Si max |
Mn max |
P max. |
S max. |
%,by mass | 0.17 | 0.17 | -- | 1.40 | 0.045 | 0.045 |
S235JRG2 steel sheet Mechanical properties
thickness | Yield Strength ReH[N/mm2]transv.min. | Tensile Strength Rm[N/mm2]transv. |
Fracture Elongation[%]transv. min. | Notch ImpactEnergy1)Ch Vcomplete samplelongitud. min [J] |
t≤ 16mm t >16mm |
235 225 |
Degree: 20 |
||
t < 3mm t ≥ 3mm |
360-510 340-470 |
|||
Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm |
16 17 18 19 24 |
Shanghai Katalor Industry Co., Ltd Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer's expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development.As S235JRG2 Mechanical and S235JRG2 suppliers,we can supply S235JRG2 Chemical,S235JRG2 Mechanical and S235JRG2 standard for you ,please contact our e-mail to get it.