Contact us
- : 0086-21-61182423
- : 0086-21-61182425
- : [email protected]
- : Room 301,Unit 6,lane 2500,xiupu Road,Kangqiao Industrial Area,Pudong New District,Shanghai
HOT News
- American standard SA516 Gr 485 pressure vessel plate
- What is SA572 Gr50 low alloy steel plate
- Heat treatment process of ASME SA516 Gr415 vessel plate
- Basic information of S620Q high-strength steel plate
- Heat treatment process of SPV490Q steel plate
- 15CrMo steel technical parameters
- SPV490Q plate impact temperature and metallographic inspection instructions
- The difference between Q345GJC high-rise buildings steel and Q355C low-alloy steel
- S275JR/S275J0/S275J2 low alloy steel plate tensile and yield strength
- Introduction of Q355NE low alloy high strength plate
Heat treatment process of SPV490Q steel plate
Posted:2021-10-16 15:32:05

1. The SPV490Q steel plate produced by the direct quenching process has good strength and toughness matching. This process can replace the traditional offline modulation process to achieve the purpose of saving energy and reducing costs.
2. The strength of the directly quenched SPV490Q steel plate after tempering is relatively small, and the toughness is improved obviously; When the quenched steel plate is reheated for tempering, the strength will be greatly reduced. With the improvement of toughness and plasticity, the former has better tempering resistance.
3. The martensitic laths of high dislocation density lath martensite obtained by direct quenching are fine, bent and crossed with each other. After reheating the quenched steel, the martensite structure with low dislocation density and coarse martensite lath are obtained.
4. Under the same tempering conditions, the carbides precipitated by directly quenching SPV490Q steel plates are fine and dispersed, while the carbides precipitated by reheating and quenching steel plates are relatively coarse.
InquiryPlease feel free to give your inquiry in the form below. we will reply you quickly!