• Improper welding of X80 pipeline may cause cracks
• Brief introduction of API X52 pipeline steel
• The difference between PSL1 and PSL2
• Harm of inclusions in X70 pipeline steel
• API 5L pipeline pipe
• X52 steel plate surface quality standards that need to be met
• The basic production process of API 5L X60 pipeline steel
• The key to Q460D steel welding process
• What does the heat treatment of Q690 Steel include?
• Reasons for choosing Q690D steel

BBN produces high strength 50W800 Silicon steel

For the precipitation strengthening of 50W800 Silicon steel, the micro-alloying elements such as Nb, Ti, V, Zr, Cu are added to form fine second-phase particles, and the strength is improved through precipitation strengthening. The study found that by adding an appropriate amount of Nb to 50W800 Silicon steel, a large number of fine and dispersed Nb(C, N) precipitates can be obtained by controlling the appropriate process, thereby significantly improving the strength of 50W800 Silicon steel. It hinders the growth of grains and deteriorates the iron loss.

The research shows that adding appropriate amount of Cr to 50W800 Silicon steel can reduce the iron loss of the steel and improve the magnetic induction, thereby improving the magnetic properties of 50W800 Silicon steel.

Therefore, if an appropriate amount of Cr is added to the high-strength 50W800 Silicon steel containing Nb, the improvement of Cr on the magnetic properties of 50W800 Silicon steel is expected to offset the deterioration of the magnetic properties caused by the precipitation strengthening of Nb.

Therefore, on the basis of high-strength 50W800 Silicon steel containing Nb, a small amount of Cr was designed to be added. The influence law and mechanism of Cr on the properties of high-strength 50W800 Silicon steel containing Nb were explored, and experimental data and theoretical support were provided for the composition design of high-strength 50W800 Silicon steel produced by BBN.